Auto interface of the DYNNOX XL53 with airwheels

The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray.

At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.

Application

Vehicle interface XL36 in combination with pneumatic tire option

The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the car plate a kind of puzzle.

Application

This plate is for the vehicle interface XL36

Option

When the option of pneumatic tires is chosen, the wooden plate becomes 7 cm wider but not longer.

Dimensions

764 x 1470 x 15mm

Safety

The positioning of the parts must be very accurate due to the positioning and locking of the chassis on the vehicle interface.

The set of fasteners contain all small parts for mounting all parts of the car interface on the Dynnox wooden plate.

Application:

All models