Complet DYNNOX XL36 with air wheels

The XL36 chassis is the longest and the thinnest Dynnox. The front and back are the same width. The car interface is not included.

Due to its length and width, it is often used when enough space in the car is also important. An application of approx. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application.

Read more about the XL36 or contact us!

The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray.

At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.

Application

Vehicle interface XL36 in combination with pneumatic tire option

The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the car plate a kind of puzzle.

Application

This plate is for the vehicle interface XL36

Option

When the option of pneumatic tires is chosen, the wooden plate becomes 7 cm wider but not longer.

Dimensions

764 x 1470 x 15mm

Safety

The positioning of the parts must be very accurate due to the positioning and locking of the chassis on the vehicle interface.

The set of fasteners contain all small parts for mounting all parts of the car interface on the Dynnox wooden plate.

Application:

All models