Ersatzteile Dynnox XL362024-03-28T20:04:53+00:00
  • Pneumatic tire wheel of 260 mm for the Dynnox L46, XL36 and XL53.
  • The vehicle interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need rails and 6 knobs. The rails are mounted in the floor of the vehicle. They are 1.5 m long. For the Dynnox L46, these can be shortened to 1.2 m. The mounting of this rail is very important for safety. This must be mounted by an expert in the field of commercial vehicle installation. Due to the enormous variety of commercial vehicles, we cannot provide a universal installation manual for this. If your commercial vehicle installer wants to deliver this rail, he must apply the European dimensions.

    Application:

    All models Prefer the complete set? Please check our Detachable vehicle interface.
  • Luchtband van 200 mm met zwenkwiel voor de Dynnox L46, XL36 en XL53.
  • The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need 6 knobs tested at 2000 newton. An important precondition for your safety. This is very specific mounting material that is not easy to obtain. This set contains 2 knobs for spare parts.                                                                                                  

    Application

    All models Prefer the complete set? Please check our Detachable vehicle interface.
  • Loading tray 36

     317,50
    The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.

    Application

    Vehicle interface XL36
  • Loading tray 43

     355,98
    The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.

    Application

    Vehicle interface XL36 in combination with pneumatic tire option
  • The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need rails and 6 knobs. The rails are mounted in the floor of the vehicle. They are 1.5 m long. For the Dynnox L46, these can be shortened to 1.2 m. The mounting of this rail is very important for safety. This must be mounted by an expert in the field of commercial vehicle installation. Due to the enormous variety of commercial vehicles, we cannot provide a universal installation manual for this. If your commercial vehicle installer wants to deliver this rail, he must apply the European dimensions. The 6 knobs have been tested at 2000 newtons. An important precondition for your safety. This is very specific mounting material that is not easy to obtain.                                                                                        

    Application:

    All models
  • Dynnox XL36 carrier

     1.309,00
    The XL36 chassis is the longest and the thinnest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used when enough space in the car is also important. An application of approx. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application. Read more about the XL36 or contact us!
Go to Top