-
Das Fahrgestell L46 ist der kürzeste Dynnox. Das Auto-Interface ist nicht im Lieferumfang enthalten. Die Vorderseite ist 10 cm kürzer als die Rückseite, da die Beine beim Beladen des Fahrgestells verstellt werden. Aufgrund seiner Länge in Kombination mit seiner Manövrierfähigkeit wird er häufig in Innenräumen eingesetzt. Eine Anwendung von ca. 60 cm Breite, 120 Länge und 120 Höhe können auf dem Rahmen montiert werden, vorausgesetzt, dass die Masse (Last) in der Anwendung gut verteilt ist Lesen Sie mehr über die Dynnox L46 or Kontaktieren Sie uns!
-
Die Fahrzeugschnittstelle besteht aus drei Kernteilen: der Ladeplattform, der Ladeschale und der Holzplatte. The Carrier L46 is not included. Die Fahrzeugschnittstelle hat drei wesentliche Funktionen: A) durch die Ladeschale wird der Mechanismus entriegelt. Siehe Art. Ladeschale B) es führt das Fahrgestell im Fahrzeug. C) Es verriegelt das Fahrgestell im Fahrzeug.
-
Das komplette L46 besteht aus dem Chassis L46 + der Autoschnittstelle + der Holzplatte L46. Damit haben Sie alles, was Sie für den Dynnox L46 benötigen. Der Dynnox L46 bildet die Grundlage für jedes schmale mobile Transportsystem in Firmenfahrzeugen. Das Fahrgestell wiegt nur 80 kg und hat eine Tragfähigkeit von nicht weniger als 250 kg! Sie können eine unserer bewährten Anwendungen wählen oder ein Installationsmodul entwerfen, das perfekt zu Ihrer Situation passt; das intelligente System hält alles leicht und einfach beweglich.
-
Set leg adjustment bolt + nut ensures that the legs move forward or backwards and therefore indirectly affect the play of the safety locks. You can understand their functions by watching the instruction film for carrier assembly.
Application
All models -
The “Shaft with spring cotter” forms the pivot points of the Loadingtray. These must be greased during assembly. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The locking lever locks the loading tray. This can be mounted with pop rivet and/or M4 bolts. These are not included.
Applications:
Vehicle interface of all models -
This cable is used to unlock the car interface. The installation of this cable is very important for the correct functioning of the lock when an underframe is unloaded. We recommend that you watch the instruction film assembly auto interface.
Application:
All models -
The Support plates ensure that the wooden plate is not dented by the wheels of the Carrier when it is loaded onto the veicle interface. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
These nylon wheels are mounted on the bottom of all types of chassis. When mounting these wheels we advise the use of grease to avoid frictional noise. The durability of these wheels depends on the beauty of your vehicle interface when loading and/or unloading a chassis.
Applications
All models -
The loading wheels allow loading and rolling of the carrier on the vehicle interface. The bolts must be mounted with loctite to prevent them from coming loose.
Application
All models -
The set of fasteners contain all small parts for mounting all parts of the car interface on the Dynnox wooden plate.
Application:
All models -
The levers loading platform secures the suspension of the loading tray when it is folded out. These can be easily disassembled so that the loading tray can be disconnected from the vehilcle interface. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The wheels support frames ensure that the carrier rolls on the car interface. It is very important that the bolts are properly greased during installation. This is to prevent frictional noise.
Applications:
All models -
These casters are usually used for flat surfaces for both indoors and outdoors. They can handle 70 kg per wheel. The use of these casters makes starting a carrier smoother.
-
These wheels are similar in profile to the standard wheels, only slightly larger.
-
The guide rail left provides guidance for the carrier when it is being loaded. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need 6 knobs tested at 2000 newton. An important precondition for your safety. This is very specific mounting material that is not easy to obtain.
Application:
All models Prefer the complete set? Please check our Detachable vehicle interface! -
The fixation locking knobs ensures that the frame is anchored in the brackets. Assembly requires some Dynnox expertise. You can find the instructions in the assembly film of the carrier.
Applications
All models -
Luchtband van 200 mm met zwenkwiel voor de Dynnox L46, XL36 en XL53.
-
These casters are usually used for flat surfaces for both indoors and outdoors. They can handle 70 kg per wheel. The use of these casters makes starting a carrier smoother.
-
The safety locks are the part of the mechanism that lock and unlock the legs. Assembly requires some Dynnox expertise. The bolts should be mounted with loctite to prevent loosening of the screws. Note: when replacing these parts the clearance of the legs must be reset. See manual. Also watch our assembly video.
Applications
All models -
The Brackets are made of stainless steel and ensure the positioning and anchoring of the frame on the laoding tray. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application
Vehicle interface of all models -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the vehicle plate a kind of puzzle.
Application
This plate is for vehicle interface L46.Dimensions
794 x 1185 x 15mmSafety
The positioning of the parts must be totally accurate due to the positioning and locking of the chassis on the vehicle interface. -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the car plate a kind of puzzle.
Application
This plate is for the vehicle interface L46.Option
When the option of pneumatic tires is chosen, the wooden plate becomes 7 cm wider but not longer.Dimensions
864 x 1185 x 15 mmSafety
The positioning of the parts must be very accurate due to the positioning and locking of the chassis on the vehicle interface. -
The vehicle interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need rails and 6 knobs. The rails are mounted in the floor of the vehicle. They are 1.5 m long. For the Dynnox L46, these can be shortened to 1.2 m. The mounting of this rail is very important for safety. This must be mounted by an expert in the field of commercial vehicle installation. Due to the enormous variety of commercial vehicles, we cannot provide a universal installation manual for this. If your commercial vehicle installer wants to deliver this rail, he must apply the European dimensions.
Application:
All models Prefer the complete set? Please check our Detachable vehicle interface. -
The Safety activator is part of the chassis. The Safety activator is the most important part of Dynnox. When loading an undercarriage in a vehicle, the unlocking of the legs is hereby ensured. But also the locking of the legs when unloading a chassis. This part is for the Dynnox L46. Note: the performance of the legs must be reset when these parts are replaced. See manual.
Applications
Dynnox L46 -
Luchtband van 200 mm met zwenkwiel voor de Dynnox L46, XL36 en XL53.
-
The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need 6 knobs tested at 2000 newton. An important precondition for your safety. This is very specific mounting material that is not easy to obtain. This set contains 2 knobs for spare parts.
Application
All models Prefer the complete set? Please check our Detachable vehicle interface.
