-
The fixation locking knobs ensures that the frame is anchored in the brackets. Assembly requires some Dynnox expertise. You can find the instructions in the assembly film of the carrier.
-
Set leg adjustment bolt + nut ensures that the legs move forward or backwards and therefore indirectly affect the play of the safety locks. You can understand their functions by watching the instruction film for carrier assembly.
Application
All models -
The levers loading platform secures the suspension of the loading tray when it is folded out. These can be easily disassembled so that the loading tray can be disconnected from the vehilcle interface. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The loading wheels allow loading and rolling of the carrier on the vehicle interface. The bolts must be mounted with loctite to prevent them from coming loose.
Application
All models -
The locking lever locks the loading tray. This can be mounted with pop rivet and/or M4 bolts. These are not included.
Applications:
Vehicle interface of all models -
These nylon wheels are mounted on the bottom of all types of chassis. When mounting these wheels we advise the use of grease to avoid frictional noise. The durability of these wheels depends on the beauty of your vehicle interface when loading and/or unloading a chassis.
Applications
All models -
The Brackets are made of stainless steel and ensure the positioning and anchoring of the frame on the laoding tray. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application
Vehicle interface of all models -
These casters are usually used for flat surfaces for both indoors and outdoors. They can handle 70 kg per wheel. The use of these casters makes starting a carrier smoother.
-
The safety locks are the part of the mechanism that lock and unlock the legs. Assembly requires some Dynnox expertise. The bolts should be mounted with loctite to prevent loosening of the screws. Note: when replacing these parts the clearance of the legs must be reset. See manual. Also watch our assembly video.
Applications
All models -
The “Shaft with spring cotter” forms the pivot points of the Loadingtray. These must be greased during assembly. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The wheels support frames ensure that the carrier rolls on the car interface. It is very important that the bolts are properly greased during installation. This is to prevent frictional noise.
Applications:
All models -
The Support plates ensure that the wooden plate is not dented by the wheels of the Carrier when it is loaded onto the veicle interface. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the car plate a kind of puzzle.
Application
This plate is for the vehicle interface L46.Option
When the option of pneumatic tires is chosen, the wooden plate becomes 7 cm wider but not longer.Dimensions
864 x 1185 x 15 mmSafety
The positioning of the parts must be very accurate due to the positioning and locking of the chassis on the vehicle interface.
