-
These casters are usually used for flat surfaces for both indoors and outdoors. They can handle 70 kg per wheel. The use of these casters makes starting a carrier smoother.
-
The safety locks are the part of the mechanism that lock and unlock the legs. Assembly requires some Dynnox expertise. The bolts should be mounted with loctite to prevent loosening of the screws. Note: when replacing these parts the clearance of the legs must be reset. See manual. Also watch our assembly video.
Applications
All models -
The “Shaft with spring cotter” forms the pivot points of the Loadingtray. These must be greased during assembly. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The wheels support frames ensure that the carrier rolls on the car interface. It is very important that the bolts are properly greased during installation. This is to prevent frictional noise.
Applications:
All models -
El chasis L46 es el Dynnox más corto. La interfaz del coche no está incluida. La parte delantera es 10 cm más corta que la trasera debido al ajuste de las patas cuando se carga el chasis. Debido a su longitud en combinación con su maniobrabilidad, suele utilizarse en interiores. Una aplicación de aprox. 60 cm de anchura, 120 de longitud y 120 de altura pueden montarse en el bastidor, siempre que la masa (carga) esté bien distribuida en la aplicación Más información sobre el Dynnox 46 o ponte en contacto con nosotros
-
The Support plates ensure that the wooden plate is not dented by the wheels of the Carrier when it is loaded onto the veicle interface. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the car plate a kind of puzzle.
Application
This plate is for the vehicle interface L46.Option
When the option of pneumatic tires is chosen, the wooden plate becomes 7 cm wider but not longer.Dimensions
864 x 1185 x 15 mmSafety
The positioning of the parts must be very accurate due to the positioning and locking of the chassis on the vehicle interface. -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the vehicle plate a kind of puzzle.
Application
This plate is for vehicle interface L46.Dimensions
794 x 1185 x 15mmSafety
The positioning of the parts must be totally accurate due to the positioning and locking of the chassis on the vehicle interface.
