-
El chasis L46 es el Dynnox más corto. La interfaz del coche no está incluida. La parte delantera es 10 cm más corta que la trasera debido al ajuste de las patas cuando se carga el chasis. Debido a su longitud en combinación con su maniobrabilidad, suele utilizarse en interiores. Una aplicación de aprox. 60 cm de anchura, 120 de longitud y 120 de altura pueden montarse en el bastidor, siempre que la masa (carga) esté bien distribuida en la aplicación Más información sobre el Dynnox 46 o ponte en contacto con nosotros
-
The wheels support frames ensure that the carrier rolls on the car interface. It is very important that the bolts are properly greased during installation. This is to prevent frictional noise.
Applications:
All models -
The “Shaft with spring cotter” forms the pivot points of the Loadingtray. These must be greased during assembly. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The safety locks are the part of the mechanism that lock and unlock the legs. Assembly requires some Dynnox expertise. The bolts should be mounted with loctite to prevent loosening of the screws. Note: when replacing these parts the clearance of the legs must be reset. See manual. Also watch our assembly video.
Applications
All models -
These casters are usually used for flat surfaces for both indoors and outdoors. They can handle 70 kg per wheel. The use of these casters makes starting a carrier smoother.
-
The Brackets are made of stainless steel and ensure the positioning and anchoring of the frame on the laoding tray. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application
Vehicle interface of all models -
These nylon wheels are mounted on the bottom of all types of chassis. When mounting these wheels we advise the use of grease to avoid frictional noise. The durability of these wheels depends on the beauty of your vehicle interface when loading and/or unloading a chassis.
Applications
All models -
The locking lever locks the loading tray. This can be mounted with pop rivet and/or M4 bolts. These are not included.
Applications:
Vehicle interface of all models
