-
The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need 6 knobs tested at 2000 newton. An important precondition for your safety. This is very specific mounting material that is not easy to obtain.
Application:
All models Prefer the complete set? Please check our Detachable vehicle interface! -
The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need 6 knobs tested at 2000 newton. An important precondition for your safety. This is very specific mounting material that is not easy to obtain. This set contains 2 knobs for spare parts.
Application
All models Prefer the complete set? Please check our Detachable vehicle interface. -
The vehicle interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need rails and 6 knobs. The rails are mounted in the floor of the vehicle. They are 1.5 m long. For the Dynnox L46, these can be shortened to 1.2 m. The mounting of this rail is very important for safety. This must be mounted by an expert in the field of commercial vehicle installation. Due to the enormous variety of commercial vehicles, we cannot provide a universal installation manual for this. If your commercial vehicle installer wants to deliver this rail, he must apply the European dimensions.
Application:
All models Prefer the complete set? Please check our Detachable vehicle interface. -
Air wheel 260×85 mm
€ 93,00Luchtband wiel van 260 mm voor de Dynnox L46, XL36 en XL53. -
Cable
€ 20,47This cable is used to unlock the car interface. The installation of this cable is very important for the correct functioning of the lock when an underframe is unloaded. We recommend that you watch the instruction film assembly auto interface.Application:
All models -
Caster wheel rubber 125×40 mm
€ 53,50Standard wheels -
Standard wheels
-
Castor air wheel 200×40
€ 98,00Luchtband van 200 mm met zwenkwiel voor de Dynnox L46, XL36 en XL53. -
Castor wheel rubber 150×40 mm
€ 67,85These wheels are similar in profile to the standard wheels, only slightly larger. -
Castor wheel rubber 200×40 mm
€ 76,50Standard wheels for all Dynnox models. -
Detachable auto interface
€ 485,00The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need rails and 6 knobs. The rails are mounted in the floor of the vehicle. They are 1.5 m long. For the Dynnox L46, these can be shortened to 1.2 m. The mounting of this rail is very important for safety. This must be mounted by an expert in the field of commercial vehicle installation. Due to the enormous variety of commercial vehicles, we cannot provide a universal installation manual for this. If your commercial vehicle installer wants to deliver this rail, he must apply the European dimensions. The 6 knobs have been tested at 2000 newtons. An important precondition for your safety. This is very specific mounting material that is not easy to obtain.Application:
All models -
Dynnox XL53 carrier
€ 1.250,00The chassis XL53 is the longest and widest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used for bulky and / or complicated applications. An application of approx. 80 cm width, 140 length and 120 hight can be mounted on the frame, providing that the mass (load) is well distributed in the application. Read more about the XL53 or contact us! -
Guide rail left
€ 87,00The guide rail left provides guidance for the carrier when it is being loaded. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.Application:
Vehicle interface of all models -
Loading tray 53
€ 342,90The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.Application
Vehicle interface XL53 Vehicle interface XL46 in combination with pneumatic tire option -
Loading tray 53
€ 342,90The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.Application
Vehicle interface XL53 Vehicle interface XL46 in combination with pneumatic tire option -
Loading tray 60
€ 380,16The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.Application
Vehicle interface XL53 in combination with pneumatic tire option -
These casters are usually used for flat surfaces for both indoors and outdoors. They can handle 70 kg per wheel. The use of these casters makes starting a carrier smoother.
-
Safety activator 53
€ 253,80The safety activator is part of the chassis. The safety activator is the most important part of Dynnox. When loading an undercarriage in a vehicle, the unlocking of the legs is hereby ensured. But also the locking of the legs when unloading a chassis. This part is for the Dynnox XL53. Note: the performance of the legs must be reset when these parts are replaced. See manual.Applications
Dynnox XL53 -
Set air wheels 260×85
€ 178,00Pneumatic tire wheel of 260 mm for the Dynnox L46, XL36 and XL53. -
Set Castor air wheel 200×40
€ 228,00Luchtband van 200 mm met zwenkwiel voor de Dynnox L46, XL36 en XL53. -
Set fasteners
€ 47,00The set of fasteners contain all small parts for mounting all parts of the car interface on the Dynnox wooden plate.Application:
All models -
Set fixation locking knobs
€ 95,60The fixation locking knobs ensures that the frame is anchored in the brackets. Assembly requires some Dynnox expertise. You can find the instructions in the assembly film of the carrier.Applications
All models
