-
Luchtband van 200 mm met zwenkwiel voor de Dynnox L46, XL36 en XL53.
-
The fixation locking knobs ensures that the frame is anchored in the brackets. Assembly requires some Dynnox expertise. You can find the instructions in the assembly film of the carrier.
Applications
All models -
The Safety activator is part of the chassis. The Safety activator is the most important part of Dynnox. When loading an undercarriage in a vehicle, the unlocking of the legs is hereby ensured. But also the locking of the legs when unloading a chassis. This part is for the Dynnox L46. Note: the performance of the legs must be reset when these parts are replaced. See manual.
Applications
Dynnox L46 -
The chassis XL53 is the longest and widest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used for bulky and / or complicated applications. An application of approx. 80 cm width, 140 length and 120 hight can be mounted on the frame, providing that the mass (load) is well distributed in the application. Read more about the XL53 or contact us!
-
Set leg adjustment bolt + nut ensures that the legs move forward or backwards and therefore indirectly affect the play of the safety locks. You can understand their functions by watching the instruction film for carrier assembly.
Application
All models -
The vehicle interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need rails and 6 knobs. The rails are mounted in the floor of the vehicle. They are 1.5 m long. For the Dynnox L46, these can be shortened to 1.2 m. The mounting of this rail is very important for safety. This must be mounted by an expert in the field of commercial vehicle installation. Due to the enormous variety of commercial vehicles, we cannot provide a universal installation manual for this. If your commercial vehicle installer wants to deliver this rail, he must apply the European dimensions.
Application:
All models Prefer the complete set? Please check our Detachable vehicle interface. -
These nylon wheels are mounted on the bottom of all types of chassis. When mounting these wheels we advise the use of grease to avoid frictional noise. The durability of these wheels depends on the beauty of your vehicle interface when loading and/or unloading a chassis.
Applications
All models -
The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need rails and 6 knobs. The rails are mounted in the floor of the vehicle. They are 1.5 m long. For the Dynnox L46, these can be shortened to 1.2 m. The mounting of this rail is very important for safety. This must be mounted by an expert in the field of commercial vehicle installation. Due to the enormous variety of commercial vehicles, we cannot provide a universal installation manual for this. If your commercial vehicle installer wants to deliver this rail, he must apply the European dimensions. The 6 knobs have been tested at 2000 newtons. An important precondition for your safety. This is very specific mounting material that is not easy to obtain.
Application:
All models -
The car interface can be removed in 5 minutes so that the floor of the vehicle can be used for other applications. For this you need 6 knobs tested at 2000 newton. An important precondition for your safety. This is very specific mounting material that is not easy to obtain. This set contains 2 knobs for spare parts.
Application
All models Prefer the complete set? Please check our Detachable vehicle interface. -
The guide rail left provides guidance for the carrier when it is being loaded. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The levers loading platform secures the suspension of the loading tray when it is folded out. These can be easily disassembled so that the loading tray can be disconnected from the vehilcle interface. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The locking lever locks the loading tray. This can be mounted with pop rivet and/or M4 bolts. These are not included.
Applications:
Vehicle interface of all models -
The Brackets are made of stainless steel and ensure the positioning and anchoring of the frame on the laoding tray. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application
Vehicle interface of all models -
The “Shaft with spring cotter” forms the pivot points of the Loadingtray. These must be greased during assembly. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The Support plates ensure that the wooden plate is not dented by the wheels of the Carrier when it is loaded onto the veicle interface. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly.
Application:
Vehicle interface of all models -
The Safety activator is part of the chassis. The Safety activator is the most important part of Dynnox. When loading an undercarriage in a vehicle, the unlocking of the legs is hereby ensured. But also the locking of the legs when unloading a chassis. This part is for the Dynnox XL36. Note: the performance of the legs must be reset when these parts are replaced. See manual.
Applications
Dynnox XL36 -
The complete XL36 is composed of the chassis L46 + the car interface + the wooden plate L46. With this you have everything you need for the Dynnox XL36. The mobile Dynnox transport system is available in three dimensions and can be used in all types of company vans. The XL36 is our narrowest model. The Dynnox XL36 forms the basis for every narrow mobile transport system in company vehicles. The undercarriage weighs only 80 kg and has a bearing capacity of no less than 250 kg! You can select one of our proven applications or design an installation module that perfectly matches your situation; the smart system keeps everything light and easily moveable. For this model a detachable auto interface is available. This allows flexible deployability of the Dynnox. This way you can use the Dynnox for project-based work, easily smooth out the load floor or take out the Dynnox in case of an exchange of company vehicles. Read more about the XL36 or contact us!
Dimensions
The Dynnox XL36 has a frame width of 360 mm. The detachable auto interface is structured around a wooden plate of at least 12 mm thickness. From 16 cm above the frame the installation module could be up to 20 cm wider. -
The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.
Application
Vehicle interface XL36 -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the vehicle plate a kind of puzzle.
Application
This plate is for vehicle interface X36.Dimensions
694 x 1470 x 15mmSafety
The positioning of the parts must be totally accurate due to the positioning and locking of the chassis on the vehicle interface. -
The safety activator is part of the chassis. The safety activator is the most important part of Dynnox. When loading an undercarriage in a vehicle, the unlocking of the legs is hereby ensured. But also the locking of the legs when unloading a chassis. This part is for the Dynnox XL53. Note: the performance of the legs must be reset when these parts are replaced. See manual.
Applications
Dynnox XL53 -
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier XL36 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism . See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle.
Application:
Dynnox XL36 -
The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.
Application
Vehicle interface XL53 Vehicle interface XL46 in combination with pneumatic tire option -
The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.
Application
Vehicle interface XL53 in combination with pneumatic tire option -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the car plate a kind of puzzle.
Application
This plate is for the vehicle interface XL53Option
When the option of pneumatic tires is chosen, the wooden plate becomes 7 cm wider but not longer.Dimensions
934 x 1470 x 15mmSafety
The positioning of the parts must be very accurate due to the positioning and locking of the chassis on the vehicle interface. -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the vehicle plate a kind of puzzle.
Application
This plate is for vehicle interface XL53Dimensions
864 x 1470 x 15mmSafety
The positioning of the parts must be totally accurate due to the positioning and locking of the chassis on the vehicle interface. -
Die Fahrzeugschnittstelle besteht aus drei Kernteilen: der Ladeplattform, der Ladeschale und der Holzplatte. The Carrier L46 is not included. Die Fahrzeugschnittstelle hat drei wesentliche Funktionen: A) durch die Ladeschale wird der Mechanismus entriegelt. Siehe Art. Ladeschale B) es führt das Fahrgestell im Fahrzeug. C) Es verriegelt das Fahrgestell im Fahrzeug.
-
Das Fahrgestell L46 ist der kürzeste Dynnox. Das Auto-Interface ist nicht im Lieferumfang enthalten. Die Vorderseite ist 10 cm kürzer als die Rückseite, da die Beine beim Beladen des Fahrgestells verstellt werden. Aufgrund seiner Länge in Kombination mit seiner Manövrierfähigkeit wird er häufig in Innenräumen eingesetzt. Eine Anwendung von ca. 60 cm Breite, 120 Länge und 120 Höhe können auf dem Rahmen montiert werden, vorausgesetzt, dass die Masse (Last) in der Anwendung gut verteilt ist Lesen Sie mehr über die Dynnox L46 or Kontaktieren Sie uns!
-
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier L46 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism. See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle.
-
The chassis L46 is the shortest Dynnox. The car interface is not included. The front is 10cm shorter than the back due to the adjustment of the legs when the chassis is loaded. Due to its length in combination with its maneuverability, it is often used indoors. An application of approx. 60 cm width, 120 length and 120 hight can be mounted on the frame, providing that the mass (load) is well distributed in the application Read more about the L46 or contact us!
-
Das XL36-Gehäuse ist das längste und das dünnste Dynnox. Die Vorder- und Rückseite sind gleich breit. Das Auto-Interface ist nicht im Lieferumfang enthalten. Aufgrund seiner Länge und Breite wird er oft verwendet, wenn auch genügend Platz im Auto wichtig ist. Eine Anwendung von ca. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application. Lesen Sie mehr über die Dynnox XL36 or Kontaktieren Sie uns!
-
The XL36 chassis is the longest and the thinnest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used when enough space in the car is also important. An application of approx. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application. Read more about the XL36 or contact us!
-
The XL36 chassis is the longest and the thinnest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used when enough space in the car is also important. An application of approx. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application. Read more about the XL36 or contact us!
